Load type > Mean pitch

Definition of the pitching moment due to wind loading across the element axis (wind direction normal to the axis) (m = cp * Rho * v^2 / 2).

Setting	Description
From, To, Step	Element series to be loaded
Assembly	Alternative to load assignment via element series: Name of the assembly to be loaded. The specified load is applied to every element of the specified assembly.
Rho	Air density (tons per volume unit) Note: No default value. The density must be explicitly specified. (Value appr. 0.00125 t/m^3; mass unit always tons t, cannot be changed)
Alpha	Attack angle (angle of incidence, angle between the local z-axis of the element and the wind direction, positive from +z to the wind direction in direction +y Note: Loads in negative z-direction may be modeled either by defining an attack angle of 180° or by specifying a negative drag coefficient
v-beg	Wind velocity at element begin
v-end	Wind velocity at element end Note: The load intensity is calculated for the element begin and element end, and then applied as linearly distributed torsional moment load.
cp	Pitch coefficient (positive, if the moment turns from +z to +y)
cd'	Derivation of drag coefficient with respect to alpha (irrelevant for static loading).
Options: None, Mult. by CS width, Mult. by CS depth	None: Area included in the pitch coefficient (m = cp * Rho * v^2 / 2) Mult. By CS width: Pitch coefficient related to the cross-section width b (m = cp * b * b * Rho * v^2 / 2) Mult. By CS depth: Pitch coefficient related to the cross-section depth h (m = cp * h * h * Rho * v^2 / 2)
[OK+Series]	To continue with further input of the same load type